EN - 11
EN
2.8 Evacuating air while filling the system
- Open all the system interception devices (manual or automatic);
- Start the filling by slowly opening the system water filling tap;
- Use a screwdriver on the coil bleeder located above (fig. 17 réf. A) .
- When water starts to leave the unit’s bleeder, close them and continue to load up to the nominal value intended for the system.
Check the hydraulic seal of the gaskets.
It is advisable to repeat these operations after the appliance has been running for a few hours and periodically check the pressure
of the system.
Fig. 17
