EN - 9
EN
2.7 Rotation for tubes on the right
The operations described and the relative images refer to a machine with fixtures on the left on which the fixtures on the right
side must be rotated. If there is a machine available with right side fixtures that require rotation to the left, the sequence of the
operations is the same, only the images are a mirror image.
2.7.1 Dismounting panels
- Dismount the upper grill (fig. 12 ref. A) unscrewing the two fixing screws (fig. 12 ref. B).
- Open the side inspection hatch (fig. 12 ref. C).
- On the left-hand side loosen the screw (fig. 12 ref. F) that fixes the left panel (fig. 12 ref. G), then lift it up and move it slightly
to the left.
- On the opposite side lift the cover (fig. 12 ref. H) and unscrew the screw (fig. 12 ref. L).
- Move the side panel slightly to the right and lift it out (fig. 12 ref. P).
- Remove the lower front grill (fig. 13 ref. A).
- Unscrew the screws (fig. 14 ref. A-B) fastening the front plate (fig. 14 ref. C).
A
B
B
C
F
G
H
P
L
Fig. 12
A
A
Fig. 13
Fig. 14
