CIAT BOX ELEC Eco+, Control Manual

Page: 22 / 32

5 - ELECTRICAL CONNECTIONS
Positioning switches
Inside each box slave BOX ELEC Eco + is an internal regulator that collects and interprets the instructions of the master controller.
For the proper functioning of the regulation it is imperative to position the switches (symbolized in black) of this internal regulator
as below:
HELIOTHERME n° 1
HELIOTHERME n° 2
HELIOTHERME n° 3
HELIOTHERME n° 1 HELIOTHERME n° 2 HELIOTHERME n° 3
Switch 3 is not used (nothing will happen if its position is changed).
Switch 4 must be set to ON.
Correct positioning of these switches, while properly setting parameter 29 (see page 8), you will see precisely the master controller
of the display on which HELIOTHERME:
-
Engine failure is present
-
A defect is present electric battery
-
A failure to communicate with the master controller is present
BOX ELEC Eco+ EN-22