CIAAT BRAVA21, Operation Manual

Page: 14 / 25

Chapter 2. Installing and Set Up
10
Installing Tray
Installing Dust Box
Transporting the Printer
Insert the claw of the tray first and insert the
projected section of the printer in the hole at
the tray.
Insert the claw of the dust box first and insert
the projected section of the printer in the hole
at the bottom of the dust box.
The following cautions are necessary in
transportation of the printer.
Since an incorrect transportation method
causes a printer fault, follow the correct
method.
1. Remove the ink ribbon and paper from
the printer before transporting the
printer.
If the ink ribbon or paper cannot be
removed due to a fault, consult with the
distributor.
2. Use a genuine box.
If the box used at the purchase cannot
be used, consult with your distributor
and purchase a new box.
Claw