1
I. IMPORTANT SAFEGUARDS
1.
All the safety and operating instructions should be read before the units is operated.
2.
This unit should be operated only from the type of power source indicated on the marking
label. If you are not sure of the type of power supply you plan to use, consult your
appliance dealer or local power company. For units intended to operate from battery power
or other sources, refer to operating instructions.
3.
During the course of transportation, storage and installation, the product should be avoided
from incorrect operations such as heavy pressing, strong vibration etc., which can cause
damage of product as there are sophisticated optical and electronic devices inside the
machine.
4.
Do not attempt to disassemble the camera. In order to prevent electric shock, do not
remove screws or covers. There are no user-serviceable parts inside.
5. Always follow all electrical standards for safety when it is in operation. Adopt the
particular power supply which is provided with the unit. RS-485 and video signal should
keep enough distance with high voltage equipments and cables when they are in
transmission. Precautions for anti-lightning and anti-surging should be taken if necessary.
6. The product should be indoor installed and operated to avoid rain and moisture. Do not
use it in wet places. If outdoor installation is needed, the closed protect cover should be
used and it is absolutely prohibited to use it in open air independently.
7. Do not operate it in case temperature, humidity and power supply are beyond the limited
stipulations.
8.
Do not let the camera aim at the sun or the object with extreme light whatsoever it is
switched on or not. Do not let the camera aim at or monitor bright and standstill object for
a long time.
9. Do not use aggressive detergent to clean the main body of the camera. Wipe dirt with dry
cloth. If needed, mild detergent can be used suitably.
10. Operate the intelligent speed dome camera with great care to avoid shock or vibration. It
operate incorrectly, the Speed Dome could be damaged.
11.
Do not place this unit on an unstable stand, tripod, bracket, or
mount. The unit may fall, causing serious injury to a person
and serious damage to the unit. Use only with a stand, tripod,
bracket, or mount recommended by the manufacturer or sold
with the product. Any mounting of the unit should follow the
manufacturer’s instructions and should use mounting
