11
2.
Steps of Installation (taking wall-installing style as example)
1)
Unpacking the carton and carefully take out the dome camera and its attachments.
2)
Take out the cover of the wall-installed bracket (see Figure 7).
3)
Take out system control wires from the bracket (see Figure 8).
4)
Fix the bracket on the wall (see Figure 9).
Fi gur e 7
Fi gur e 8
Fi gur e 9
5)
Rotate the vitreous cover counterclockwise and take it out. (see Figure 10)
6)
Fix the pedestal in the aluminum alloy ball (Figure 11). Install the ball on the bracket
(Figure 12).
OPEN
Fi gur e 10
Fi gur e 11
Fi gur e 12
Pedest al
Q2：M5× 16 st ai nl ess st eel
hexagon socket scr ew
Q1: M4× 8 count er sunk
head scr ew
7)
Take out the "plug and play" connector D1 (Figure 13).
8)
Connect the control wires of the system as per Figure 14.
9)
Insert connector D1 into the corresponding socket. Take care not to leave much wires
inside the ball cover but to pull them out of the cover as shown on Figure 15.
