Generally speaking, the following minimum cable cross-sectional areas must be adhered to:
2
100-230Volt
1.5mm or more
2
0-24Volt
0.5mm or more
Tips: Bell wire is often problematic in practical use because it loses too much voltage if long lengths of wire are used.
Segregate the cables in cable trunking, i.e. motor cable and light barrier cable, especially in the case of key-operated switches and ON switches
(from the house wiring system) to prevent interference where long lengths of cable are used.
OVERVIEW OF CONNECTIONS
Motors: connect the control unit exactly in accordance with the overview of connections. The gate/door wing, which opens first, must be motor 1
(M1) and when it first moves it must OPEN the gate/door. If it closes the gate/door, swap terminal 6 with terminal 8 or, in the case of motor 2
(M2), swap terminal 9 with terminal 11.
The capacitor supplied as standard must be installed between cables 6 and 8 and 9 and 11 (for space reasons, the capacitor can also be installed
in a distribution box). Make sure that its terminals are properly connected and that there is a good electrical connection. The capacitor determines
the force which the motor subsequently
TECHNICAL SPECIFICATIONS:
Operating cicles
16cicles/h
Nominal thrust
250N
Protection class
I
Power supply voltage
230Vca ±10% 50Hz
Normal current absorption
1,3A
Power 220W
Condenser
5?F
Thermo-protection
140°
Geared-motor speed
1400rpm
Rod max lenght
300mm (ECO300)
400mm (ECO400)
Max hing lenght
2,5m (ECO300)
3,5m (ECO400)
Max weight of hing
250kg
Maximum speed rod
17mm/s (ECO300)
13mm/s (ECO400)
Box protection level
IP44
Operating temperature
-20°C ÷ +55°C
6
Sede legale, comm. ed amm.va: Via Caserta al Bravo, 218 - 80144 NAPOLI Tel:
0039.081.705.09.12 pbx - Fax: 0039.081.705.01.25 - e-mail: [email protected]
Declaration of conformity
to the Standards of the Council of the European Union
è conforme ai requisiti delle direttive:
EMC 89/336 CEE in merito alla compatibilità elettromagnetica
BT 73/23 CEE in merito alla bassa tensione
del Consiglio dell'Unione Europea.
Le dichiarazioni di conformità ai requisiti sono depositati presso la:
Il dispositivo va installato dove e come descritto nella documentazione;
la casa costruttrice declina ogni responsabilità per danni arrecati a cose o persone
dovuti ad una sua diversa o errata installazione, o ad un suo improprio utilizzo.
it is in compliance with requirement of the directives:
89/336 EMC the EEC respect to 73/23 electromagnetic compatibility
BT the EEC respect to the low tension
of the Council of the European Union.
The declarations of conformity to requirement are deposited at:
The has to be installed where and as described in the documentation;
the manufacturer declines any responsibility for damages brings to things
or persons due to wrong installation, or to an improper use of it.
Sede legale, comm. ed amm.va: Via Caserta al Bravo, 218 - 80144 NAPOLI Tel:
0039.081.737.22.77 pbx - Fax: 0039.081.736.04.59 - e-mail: [email protected]
HiLTRON S.r.l.
Cap. soc. € 102.774,92 int. vers.
Iscr. trib. NA 3865/87
P.IVA IT 05253440639
C.C.I.A.A. di Napoli 436062
ECO300 / ECO400
Motoriduttore 230Vca per anta da 2,5 / 3,5mt
Dichiarazione di conformità
alle direttive del Consiglio dell'Unione Europea
Si certifica che il prodotto con marchio:
CIA Trading S.r.l.
Cap. soc. € 102.774,92 int. vers.
Iscr. trib. NA 3865/87
P.IVA IT 05253440639
C.C.I.A.A. di Napoli 436062
It is certified that the product with brand:
230Vac geared-motor for 2,5mt / 3,5mt hinged gate
