MetCam Technical Manual
4
An example of a connection of a security camera to a junction box, using the multi-Ethernet cable is presented in the
following. This is taken from the R. STAHL catalog
The above should be regarded as a general reference to how signal separation can be implemented.
It is not specific for MetCam use.
Notes
1
Instructions for opening the back cover are given in the "MetCam Instructions for use manual".
Fist release the locking screw with a 0.05" hex wrench.
Then unscrew (turn CCW) the back cover using a metal flat to bridge the opposing cuts in the cover.
Reverse this process to close the back cover after making the terminal block connection.
Verify that the cover has made contact with the body and that it is tight against it before locking the 0.05"
hex set screw.
