Pr
oduct
Usa
ge
23
10-5 ICE AND WATER DISPENSINg
Ice Dispensing Mode
If ICE(ice dispense) touch sensor button is pressed, the door of the ice
storage house is opened and ice comes out from the dispensing hole.
HOT LOCK(hot water lock) Function Release
If HOT(hot water selection) touch sensor button is selected and the
water dispensing button is pressed, hot water comes out.
* Please be careful to avoid burns and use cups during hot water dispensing.
* If hot water operation LED is turned off, hot water is not dispensed because
the heater doesn’t work.
Cold Water Dispense Mode
If COLD(cold water selection) touch sensor button is selected and water
dispensing button is pressed, cold water comes out.
* After early power ON water full LED is lighted up, cold water dispensing selection is available.
Ambient Water Dispense Mode
If AMBI(ambient water selection) touch sensor button is selected and
water dispensing button is pressed, ambient water comes out.
* If hot water or ambient water is selected and it is not used for a given time period, the system
will automatically switch into cold water dispense mode. (Default function)
* There is not a separate setting and release method for the use of ambient water/cold water/ice
making operation. They operate automatically as designated by the program when the power is
supplied.
It enables to dispense Ice and Hot water when the Lock function is released.
* If Lock function (of Ice and Hot water dispensing) is set, Ice dispensing and Hot water selection touch button do not
function. Please use it after releasing the Lock function.