Pr
oduct
Usa
ge
21
10-5 ICE AND WATER DISPENSING
15
6. Usage
① This is to be performed with the power plug inserted.
② Remove the lower cover by first pushing the cover down and then
pulling it forward.
Turn on the drainage switch, located at the bottom of the panel,
to remove water remaining in the system.
※If the drainage switch is turned on, water purification and
ice production stops.
③ Remove cold water by pressing the water dispense button.
In order to remove the water remaining in the cold water tank, tilt
the product forward and do so until cold water does not come out.
④ Take out the ice by pressing the ICE(ice dispense) touch sensor
button.
※If there is no other option but to transport the product in an
inclined position, transport the product in a backwards inclined
position if at all possible.
6-6. Draining the System for Relocation/Installation
(1) Ice Dispensing Mode
If ICE(ice dispense) touch sensor button is pressed, the door of the ice
storage house is opened and ice comes out from the dispensing hole.
(2) Hot Water Dispense Mode
If HOT(hot water selection) touch sensor button is selected and the
water dispensing button is pressed, hot water comes out.
※If HOT LOCK(hot water lock) is set, then hot water does not come
out even though the water dispensing button is pressed.
※If HOT LOCK(hot water lock) function is released, the water in the
hot water tank can be taken by selecting HOT(hot water selection)
touch sensor button and pressing the water dispensing button.
(3) Cold Water Dispense Mode
If COLD(cold water selection) touch sensor button is selected and water
dispensing button is pressed, cold water comes out.
(4) Ambient Water Dispense Mode
If AMBI(ambient water selection) touch sensor button is selected and water
dispensing button is pressed, ambient water comes out.
※If hot water or ambient water is selected and it is not used for a given time
period, the system will automatically switch into cold water dispense mode.
(Default function)
※There is not a separate setting and release method for the use of ambient
water/cold water/ice making operation. They operate automatically as
designated by the program when the power is supplied.
6-5. Ice and Water Dispensing Method
B
Note : The flushed water from water dispensing hole is around 127℉(95℃) and be
careful against a burn from hot water. Please use container as like Cup.
Drainage switch
Ice Dispensing Mode
If ICE(ice dispense) touch sensor button is pressed, the door of the ice
storage house is opened and ice comes out from the dispensing hole.
HOT LOCK(hot water lock) Function Release
If HOT(hot water selection) touch sensor button is selected and the
water dispensing button is pressed, hot water comes out.
* If HOT LOCK(hot water lock) is set, then hot water does not come out even though the water dispensing button is pressed.
* If HOT LOCK(hot water lock) function is released, the water in the hot water tank can be taken by selecting HOT(hot water
selection) touch sensor button and pressing the water dispensing button.
Cold Water Dispense Mode
If COLD(cold water selection) touch sensor button is selected and water
dispensing button is pressed, cold water comes out.
HOT(hot water) Operation Release
If AMBI(ambient water selection) touch sensor button is selected and water dispensing button is
pressed, ambient water comes out.
* If hot water or ambient water is selected and it is not used for a given time period, the system will automatically switch into
cold water dispense mode. (Default function)
* There is not a separate setting and release method for the use of ambient water/cold water/ice making operation. They
operate automatically as designated by the program when the power is supplied.
Note
The flushed water from water dispensing hole is around 127 °F(95 °C)
and be careful against a burn from hot water. Please use container as
like Cup.
