29
Troubleshooting
Symptoms
Check points
No
Yes
※
After the system power source is interrupted and then again restarted, irregular ice may temporarily be
served.
※
Contact our distributor if symptom is not solved.
When a silicon tube is contaminated by using for an extended period of time,
request follow up service.
How to maintain
a silicon tube?
When hot water is
not hot enough and
hot water is not
served.
(When taking
hot water)
Wait until the water level of ambient
water tank reaches at operating point
for hot and cold water.
If problem still occurs, request
follow up service.
Is "HOT"
(hot water operation) is on?
Is water in
ambient water tank?
Hot water is being
produced.
(It takes about
3 minutes.)
Press “HOT SELECTION
BUTTON” to start WARM-UP.
Wait until the hot water
tank becomes hot enough.
Have you taken hot water
more than 0.5 G (1
ℓ
)
at a time?
Is water in ambient
water tank?
When cold water is
not cold enough and
cold water is not
served. (When taking
cold water)
Cold water is being
produced.
(It takes about
40 minutes.)
Wait until the water level of ambient
water tank reaches at operating point
for hot and cold water. After given
time, if problem still occurs, request
follow up service.
When ambient
water is not served.
Is tap water being
supplied?
Wait until the tap water
works as the unit unplugged.
Request follow up service.
Is the power plug
inserted properly?
When the display
is not turned on
and not operated.
Insert the power plug into
wall outlet properly.
Is the HOT LOCK
(hot water lock) function set?
When hot water is
not served even
though "HOT" touch
button has been
selected.
Request follow up service.
Release HOT LOCK
function.
Request follow up service
when you still have problem
even the power plug is
inserted properly.
Is "No gas" LED is lighting?
Have you taken the water more
than 2
ℓ
in a short time?
Is "No water" LED is blinking?
When carbonated
water is not served
Request follow up
service.
Request follow up
service.
Replace the cylinder
Wait until the water level of ambient
tank reaches at operating point
for hot water.
(It takes about 30 minutes.)
Summary of Contents for CHP-5361DL
Page 31: ...30 Memo...
