12
System Status
Arm
All sensors will detect for anomalies during this mode. The hub internal siren will sound
immediately when a sensor is triggered. You and other pre-authorized users will receive
push notifications on your phones.
This mode is suitable when the property is unoccupied. It can be set from the remote
control or app.
Home (Part Arm)
All Home Zone sensors will stop detecting during this mode. This allows you and your
family to move freely inside your home without triggering an unwanted alarm.
Note:
The door/window sensors in this kit have been set to Arm Zone and the PIR sensor is set to
Home Zone by default, you can change their zone mode on the “Accessory” section of the App.
This mode is recommended for when someone is at home. It can be set from the remote control
or app.
Disarm
All sensors stop detecting except 24-Hour Zone sensors, which will trigger the alarm
regardless of system status.
Edit Accessories
Tap the accessory to enter its setting page where you can rename the device or set the
device type and zone mode.
Tap the switch to disable the accessory.
