9
Step Three: Connect the Hub to Your Router
Power on the Hub, then follow the configuration steps on App to set up your Hub
with your home WiFi. Once the connection is finished, the Hub will beep once, wait
until the WiFi indicator and the Status indicator stop blinking, you are ready to op-
erate your alarm system.
Important:
AW1 Plus does not support WiFi of 5GHz band, If dual-band (5GHz and
2.4GHz) router is used, make sure to connect with the 2.4GHz WiFi instead of the
5GHz's. Make sure your smartphone is connected to the local WiFi network and
then follow the steps in the App to connect the AW1 Plus Hub to the router.
Note:
If the connection was failed, please consult to FAQ in page 20 or contact our technical
support.
APP Control and Settings
Important Notice
In order to control the system remotely (WiFi/App), the Hub must be ‘mains’ pow-
ered via the Power Adapter. WiFi accessibility is disabled when the Hub Power
Adapter is unplugged from the mains power supply and running on batteries.
History & Setting
SOS
Account Management
System Status
Arm
Disarm
Home Arm (Part Arm)
