Chrysler Pacifica Hybrid 2021 Supplement Manual Download Page 93

Page: 93 / 100

TECHNICAL SPECIFICATIONS

ENGINE FLUIDS AND LUBRICANTS

Component

Fluid, Lubricant, or Genuine Part

Engine Coolant, Battery Coolant, Power Electric Coolant

We recommend you use Mopar Antifreeze/Coolant 10 Year/150,000 Mile

(240,000 km) Formula OAT (Organic Additive Technology) with deionized, or

distilled water for proper corrosion protection or equivalent meeting the

requirements of FCA Material Standard MS.90032.

Engine Oil – 3.6L Engine

We recommend you use API Certified SAE 0W-20 Engine Oil, meeting the

requirements of FCA Material Standard MS-6395 such as Mopar,

Pennzoil, and Shell Helix. Refer to your engine oil filler cap for correct SAE

grade.

Engine Oil Filter

We recommend you use a Mopar Engine Oil Filter. If a Mopar Engine Oil

Filter is unavailable only use filters that meet or exceed SAE/USCAR-36

Filter Performance Requirements.

Fuel Selection

87 Octane (R+M)/2 Method, 0-15% Ethanol (Do not use E-85).

21_RU2_H_SU_EN_USC_t.book Page 91

Summary of Contents for Pacifica Hybrid 2021





































































































Search results

Summary of Contents for Pacifica Hybrid 2021

Reviews:

Chrysler Pacifica Hybrid 2021, Supplement Manual, Page: 93 / 100

Search results

Summary of Contents for Pacifica Hybrid 2021

Reviews: