Chrysler Pacifica Hybrid 2021, Supplement Manual, Page: 15 / 100

GETTING TO KNOW YOUR VEHICLE 13
connection. The Portable EVSE Cordset will not
allow charging while the fault indicator is red. If
it is off, the Portable EVSE Cordset has not
detected any internal faults, or faults with the
vehicle connection. If the Fault Indicator is
flashing red, there is a fault detected either with
the Portable EVSE Cordset, electronics, or with
the vehicle connection. The Portable EVSE
Cordset may attempt to retry to provide current
to the vehicle if the fault is cleared. If the
Portable EVSE Cordset does not attempt to
provide charge to the vehicle, the charge
connector will need to be removed from the
vehicle to clear the fault.
The fault code list in the following table provides
a reference for the important faults that are
detected by the Portable EVSE Cordset. When a
fault is detected, the AC Power Indicator, the
Fault Indicator, or both the AC Power and Fault
Indicators will flash red. If only the AC Power
Indicator is red, there is a problem on the AC
Power side of the unit. If only the Fault Indicator
is flashing red, there is a problem internal to the
unit or with the vehicle. If both the AC Power and
Fault Indicators are flashing red, an over
temperature condition is detected at either the
AC plug or within the EVSE enclosure. Additional
information about the faults is provided by a
fault code that is displayed on the two green
Charge Active Indicators. The fault code
consists of four digits, each with a value of 1 or
2. The value of a digit is the number of
indicators illuminated for that part of the
sequence. For example, fault code (1, 2, 1, 1)
will display the following sequence: One
indicator will illuminate for 0.3 seconds, then
two indicators will illuminate, then one
indicator, and finally one indicator will
illuminate. After all four fault code digits have
been displayed, the indicators will remain off for
one second before repeating the sequence.
Portable EVSE Cordset Fault Code List
Flashing Fault
Code
Flashing Indicator Fault Indication Recommended Actions
1, 2, 2, 2 AC Power
Vehicle Current
Draw is Too High
Check Portable EVSE Cordset and vehicle at a service location.
1, 1, 2, 1 AC Power
Incorrect Electrical
Supply
Attempt to charge the vehicle at a different outlet. Contact a certified electrician
to check the electrical outlet and AC Supply (house wiring).
1, 1, 2, 2 AC Power
Incorrect Electrical
Supply
Attempt to charge the vehicle at a different outlet. Contact a certified electrician
to check the electrical outlet and AC Supply (house wiring).
1, 2, 1, 1 AC Power
Incorrect Electrical
Supply
Attempt to charge the vehicle at a different outlet. Contact a certified electrician
to check the electrical outlet and AC Supply (house wiring).
2
21_RU2_H_SU_EN_USC_t.book Page 13