Chrysler ASPEN Owner'S Manual Download Page 99

Page: 99 / 481

•

After confirmation, the phonebook entries will be
deleted.

•

Note that only the phonebook in the current language
is deleted.

List All Names in the UConnect

Phonebook

•

Press the PHONE button to begin.

•

After the

Ready

prompt and the following beep, say

Phonebook List Names.

•

The UConnect

system will play the names of all the

phonebook entries.

•

To call one of the names in the list, press the “Voice
Recognition” button during the playing of the desired
name, and say

Call.

NOTE:

The user can also exercise

Edit

Delete

operations at this point.

•

The UConnect

system will then prompt you as to the

number designation you wish to call.

•

The selected number will be dialed.

Phone Call Features

The following features can be accessed through the
UConnect

system if the feature(s) are available on your

cellular service plan. For example, if your cellular service
plan provides three-way calling, this feature can be
accessed through the UConnect

system. Check with

your cellular service provider for the features that you
have.

Answer or Reject an Incoming Call - No Call
Currently in Progress
When you receive a call on your cellular phone, the
UConnect

system will interrupt the vehicle audio sys-

tem, if on, and will ask if you would like to answer the
call. Press the PHONE button to accept the call. To reject

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for ASPEN


































































































































































































































































































































































































































































































Search results

Summary of Contents for ASPEN

Reviews:

Related manuals for ASPEN

Brands by name

Popular brands

Chrysler ASPEN, Owner'S Manual

Search results

Summary of Contents for ASPEN

Reviews:

Related manuals for ASPEN

Brands by name

Popular brands