Chrysler 300 2013 Owner'S Manual Download Page 33

Page: 33 / 586

Automatic Unlock Doors On Exit

The doors will unlock automatically on vehicles with
power door locks if:

1. The Automatic Unlock Doors On Exit feature is en-

abled.

2. The vehicle was in motion, then speed returned to

0 mph (0 km/h) and the transmission shift lever is
placed in NEUTRAL.

3. The driver door is opened.

4. The doors were not previously unlocked.

Automatic Unlock Doors On Exit Programming

To change the current setting, refer to “Uconnect

威

Set-

tings” in “Understanding Your Instrument Panel” for
further information.

NOTE:

Use the Automatic Unlock Doors On Exit feature

in accordance with local laws.

Child-Protection Door Lock System — Rear
Doors

To provide a safer environment for small children riding
in the rear seats, the rear doors are equipped with
Child-Protection Door Lock system.

To Engage Or Disengage The Child-Protection
Door Lock System

1. Open the rear door.

2. Insert the tip of the emergency key into the lock and

rotate to the LOCK or UNLOCK position.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Summary of Contents for 300 2013











































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 300 2013

Reviews:

Brands by name

Popular brands

Chrysler 300 2013, Owner'S Manual

Search results

Summary of Contents for 300 2013

Reviews:

Brands by name

Popular brands