Home
/
Chrysler
/
300 2013
/
Owner'S Manual

Chrysler 300 2013, Owner'S Manual, Page: 230 / 586

Share

Page: 230 / 586

Chrysler 300 2013 Owner'S Manual Download Page 230

To change the distance setting, press the Distance button
and release. Each time the button is pressed, the distance
setting adjusts between 3 (long), 2 (medium), and
1 (short).

If there is no vehicle ahead, the vehicle will maintain the
set speed. If a slower moving vehicle is detected in the

same lane, the EVIC displays the “Sensed Vehicle Indi-
cator” icon, and the system adjusts vehicle speed auto-
matically to maintain the distance setting, regardless of
the set speed.

The vehicle will then maintain the set distance until:

•

The vehicle ahead accelerates to a speed above the set
speed.

•

The vehicle ahead moves out of your lane or view of
the sensor.

•

The vehicle ahead slows to a speed below 15 mph
(24 km/h) and the system automatically disengages
itself.

•

The distance setting is changed.

•

The system disengages. (Refer to the information on
ACC Activation).

Distance Set 1 (short)

228

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

«
...
228
229
230
231
232
...
»

Summary of Contents for 300 2013











































































































































































































































































































































































































































































































































































































Reviews:

No comments