Chrysler 2007 Pacifica Instruction Manual Download Page 342

Page: 342 / 464

− Highway Driving

Reduce speed.

− Air Conditioning

Turn off temporarily.

− refer to Cooling System Operating information in the

Maintenance section of this manual for more informa-
tion.

RECREATIONAL TOWING (BEHIND
MOTORHOME, ETC.)

TOWING THIS VEHICLE BEHIND ANOTHER
VEHICLE (Flat towing with all four wheels on the
ground)

Recreational towing for this vehicle is not recommended.

NOTE:

If the vehicle requires towing make sure all four

wheels are off the ground.

342

STARTING AND OPERATING

Summary of Contents for 2007 Pacifica

















































































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Pacifica

Reviews:

Related manuals for 2007 Pacifica

Brands by name

Popular brands

Chrysler 2007 Pacifica, Instruction Manual

Search results

Summary of Contents for 2007 Pacifica

Reviews:

Related manuals for 2007 Pacifica

Brands by name

Popular brands