Chrysler 2007 Pacifica Instruction Manual Download Page 31

Page: 31 / 464

Child Protection Door Lock

To provide a safer environment for small children riding
in the rear seats, the rear doors are equipped with a child
protection door lock system.

NOTE:

When the child lock system is engaged, the door

can be opened only by using the outside door handle
even though the inside door lock is in the unlocked
position.

To Engage the Child Protection Door Lock

1. Open the rear door.

2. Insert the tip of the vehicle’s ignition key (or any
similar item) into the child lock control and slide it
upward.

3. Repeat Steps 1 and 2 to engage the Child Protection
Door Lock on the opposite rear door.

NOTE:

After engaging the child protection door lock

system, always test the door from the inside to make
certain it is in the desired position.

Child Lock Control

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Summary of Contents for 2007 Pacifica

















































































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Pacifica

Reviews:

Related manuals for 2007 Pacifica

Brands by name

Popular brands

Chrysler 2007 Pacifica, Instruction Manual

Search results

Summary of Contents for 2007 Pacifica

Reviews:

Related manuals for 2007 Pacifica

Brands by name

Popular brands