Chrysler 2005 Pacifica Touring, Manual, Page: 20 / 376

Share

Page: 20 / 376

Chrysler 2005 Pacifica Touring Manual Download Page 20

NOTE:

If the key is in the ignition switch, then all

buttons on that transmitter will be disabled. The buttons
on the remaining transmitters will work. If the vehicle is
shifted out of PARK, all the transmitter buttons are
disabled for all keys.

To unlock the doors and liftgate:

Press and release the UNLOCK button on the transmitter
once to unlock the driver’s door, or twice to unlock all
doors and liftgate. The illuminated entry system also
turns on.

NOTE:

If desired, the “Remote Unlock Driver’s Door

1st” feature can be turned on and off by referring to the
Customer Programmable Features of the “Electronic Ve-
hicle Information Center (EVIC)” section or by following
these steps.

1. Press the UNLOCK button for 4 to 10 seconds.

2. While the UNLOCK button is pressed, (after 4 sec-
onds) press the LOCK button. Release both buttons.

The “Remote Unlock Driver’s Door 1st” feature can be
reactivated by repeating this procedure.

20

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

«
...
18
19
20
21
22
...
»

Summary of Contents for 2005 Pacifica Touring

























































































































































































































































































































































































Reviews:

No comments