Chrysler 2005 Pacifica Touring Manual Download Page 18 | Manualshive

Page: 18 / 376

Chrysler 2005 Pacifica Touring Manual Download Page 18

Auto Unlock

The doors will unlock automatically on vehicles with
power door locks if:

1. The Auto Unlock feature is enabled,

2. the transmission was in gear and the vehicle speed
returned to 0 mph (0 km/h),

3. the transmission is in NEUTRAL or PARK,

4. the driver door is opened (excluding liftgate),

5. the doors were not previously unlocked and

6. the vehicle speed is 0 mph (0 km/h).

The Auto Unlock feature can be enabled or disabled by
performing the procedure in the Electronic Vehicle Infor-
mation Center (EVIC), Customer Programmable Features
section.

NOTE:

Use the Auto Door Locks and Auto Unlock

features in accordance with local laws.

Child Protection Door Lock

To provide a safer environment for small children riding
in the rear seats, the rear doors are equipped with a child
protection door lock system.

WARNING!

Avoid trapping anyone in the vehicle in a collision.
Remember that the rear doors can only be opened
from the outside when the child protection locks are
engaged.

18

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

«
...
16
17
18
19
20
...
»

Summary of Contents for 2005 Pacifica Touring

























































































































































































































































































































































































Reviews:

No comments