Chronos Manufactures Chrono Diamond Nestor 10600, Instruction Manual / International Guarantee

Page: 12 / 107

12
Nestor | Instruction Manual EN
Model: 10600 Nestor
Movement: Swiss made Quarz
ATTENTION: Do not set the date between 9.00 pm and 1.00 am as
the date might not change automatically the following day.
Date and time setting
Pull the crown carefully to position 1 and set the date by turning it
clockwi se. Pull the crown carefully to position 2 and set the time by
turning it clockwi se as well. Once finished push the crown carefully back
in to place.
Using the chronograph
Basic function
Use the button A in order to start and stop the chronograph. You can adjust the chronograph counter on
the 10 for the minutes and on the 6 for the hours. Use the button B to reset the seconds counter of the
chronograph and the chronograph counter for the minutes and hours.
Added up time measurement
Use the button A in order to start and stop the chronograph. Use the button A again in order to continue to
count the time and to stop it anew. The adding up of the time can be pursued in this way. Use the button B
to reset the seconds counter of the chronograph and the chronograph counter for the minutes and hours.
Split time measurement
Use the button A in order to start the chronograph. Use the button B in order to show the split time (the
time measurement continues to run in the background). Use the button B in order to catch up the time (the
3 chronograph hands will be updated in fast mode onto the measured time which went on running). Use
the button A in order to stop the chronograph and to show the end time.
Setting the chronograph hands
To ensure that all chronograph hands are adjusted to the 0 position, a full initialisation must be perfor-
med after the hands have been set. Each counter must be set once. For this, please pull the crown out to
position 2, then press both the A & B buttons simultaneously for a minimum of 2 seconds. Then set the
chronograph second counter to 0. By pressing button B, you will switch to the next counter. When you have
gone through all the counters, push the crown back to its original position 0.