Color One 100
TM
QSG V2.0
QSG P/N: 638-0701
1. Overview
The new Chroma-Q
®
Color One 100
™ is a LED Par fixture with RGBA LEDs and a fully
homogenized beam. Built with an internal power supply, the fixture operates as a standalone unit
with the wireless IR Remote or controlled via an external DMX console.
The Color One 100
™ is available in 2 models. The IP20 version is fitted with chassis mount
powerCon and XLR 5-Pin connectors. The IP65 version is fitted with trailing leads.
The IR Remote is included in the fixture package.
2. Safety
Caution
1.
This product is for professional use only. It is NOT intended for domestic or
outdoor use.
2.
The bright flash of light during power-up and continuous strobe effect may
cause epileptic seizure.
3.
This product must be used with safety cable.
3. Cabling and Connection
The Color One 100
™ (IP20 version) is built with chassis mount powerCon connectors for power
input/through and chassis mount XLR 5-pin for DMX input/through.
The Color One 100
™ (IP65 version) is built with trailing leads for power input/through and XLR 5-
pin trailing leads for DMX input/through. The chassis is ground bonded.
4. Mounting
The Color One 100
™ is built with a dual yoke system for floor mounting and overhead hanging
applications. Secure the fixture with a safety bond. A provision for the fixing hold is built into the
enclosure.
5. Optics
The Color One 100
™ is built with optical lens that provide a fully homogenized beam angle of
approximately ~18°.
6. Control
The control functions are accessed through the LCD display at the rear with 4 push buttons:
Back Arrow
(Enter) Stores the menu choice
Up Arrow
Increases (+) the mode level or value
Down Arrow
Decreases (-) the mode level or value
Exit
Back to the previous menu
Power-Up Display:
The software version is displayed on power up then proceeds to the Main Menu. The Main Menu
shows the model name, DMX status and start address, set control mode and number of assigned
DMX channels.
Display Mode:
The LCD display is backlit when you access the menu and turns off when left undisturbed for 5
seconds.
IR Remote:
The remote infrared control unit features control buttons for: On/Off, Dim Up/Down, various colors,
white and 4 effects: Full Color Scroll (Flash), Warm Color Scroll (Strobe), Fade In/Out (Fade),
Cold Color Scroll (Smooth). Set the fixture for IR Remote control by selecting IR Remote in the
menu No DMX Present. Point the IR Remote towards the fixture.
Control Menu:
To navigate the Control Menu options from the Main Menu,
•
Use the Up and Down arrows to navigate the control menu options
•
Press the Back arrow (Enter) to select a control menu option
•
Press the Back arrow (Enter) to save the setting and display shows Done
•
Press Exit to return to the Main Menu
