15
English
Cleaning, Checks and Storage of the home bike:
1. Cleaning
Use only a less wet cloth for cleaning.
Caution:
Never use benzene, thinner or other aggressive cleaning
agents for surface cleaning as this damage caused.
The device is only for private home use and for use suitable indoors.
Keep the unit clean and moisture from the device.
2. Storage
Remove the batteries from the computer while intending the unit
for more than 4 weeks not to use. Fold up the seat frame until it is
locked. Choose a dry storage in-house and spray some oil to the
thread of the handlebar bolt for fold up function. Cover the bike to
protect it from being discolor by any sunlight and dirty through dust.
3. Checks
We recommend every 50 hours to review the screw connections for
tightness, which were prepared in the assembly. Every 100 operating
hours, you should spray some oil at the thread of the handlebar
bolts for fold up function.
Troubleshooting
If you cannot solve the problem with the following information,
please contact the authorized service center.
Problem
Possible Cause
Solution
Computer
has no value
at Display if
you press any
key.
No Batteries insert
or batteries empty
Check the position of batte-
ries at battery compartment or
replace batteries.
Computer is
not counting
data and do
not switch
on after start
cycling.
Sensor impulse
missing base on
not well plugged
connection
Check the plug connections at
computer.
Computer is
not counting
data and do
not switch
on after start
cycling.
Sensor impulse
missing base on
not correct position
of sensor.
Check the distance between
magnet and sensor. The magnet
which is positioned at frame
should have only less than
< 5mm distance against the
sensor position.
Training area in mm
(for home trainer and user)
Free area in mm
(Training area and security area
(rotating 60cm))
Summary of Contents for WP1000
Page 51: ...51 Ceskar ...