16
Step 7:
Attach the hand grip bar (3) at support (46) wit handle bar screw (12).
1.
Place the hand grip bar (3) against the open holder of support (46) and
close the clamp.
2.
Push a spacer (11) and the handlebar cover (95) onto the handlebar
screw (12) and tighten the handgrip bar (3) at support (46) into desire
position fi rmly.
Step 8:
Attach the computer (1) at support (46).
1.
Put the plug of connection cable (8) into the socket from monitor (1)
backside.
2.
Insert the plug of hand pulse wire (7) into the socket from monitor (1)
backside.
3.
Attach the monitor (1) to top monitor bracket of front post (46).
(Attention: Ensure that the cable loom are not crunched or pinched
during installation.)
Step 9:
Checks
1.
Check the correct installation and function of all screwed and plug
connections. Installation is thereby complete.
2.
When everything is in order, familiarise yourself with the machine at a
low resistance setting and make your individual adjustments.
Note:
Please keep the tool set and the instructions in a safe place as these may
be required for repairs or spare parts orders becoming necessary later.
Summary of Contents for 9918A
Page 3: ...3 Deutsch ...
Page 43: ...43 ...
