20
Step 4:
Attach the front post (9) to main frame (71).
1. Put onto the front post (9) the front post cover (14). Guide the front post
(9) to the front post mounting tube of main frame (71) and connect the
plug of connection cable (13) to the socket of motor cable (15).
2. Insert the front post (9) to main frame (71) and secure, using allan head
bolts M8x16 (12), spring washers (6) and washers (5+69). (
Attention:
Ensure that the cable loom are not crunched or pinched during
installation.)
Step 5:
Attach the handlebar (2) and Computer (1) at handlebar
support (9).
1. Guide the computer (1) against the computer holder at
handlebar support (9) and push the plug of the connecting
cable (13) into the associated socket of the computer (1).
2. Put the computer (1) onto the computer holder of handlebar
support (9), insert the ready cable connection into the tube
of handlebar support (9) and place the pulse cable (72) into
direction of handlebar connection point. Then attach the
computer (1) with the screws (74) without squeezing a cable.
3. Take off the screws (11) from handlebar support (2) and guide
the preassembled handlebar unit (2) to the handlebar post (9)
[Drawing 1]. Connect the pulse cables (72) with associated
socket of the computer (1).
4. Attach the front handlebar cover (4) to the handlebar (2) and
screw the handlebar (2) into desired position at the handlebar
post (9) and tighten irmly with handlebar screw (8), spacer (7),
spring washer (6) and washer (5) [Drawing 2].
5. Plug the front and rear handlebar cover (3+4) together and
attach it with screws (21). Then secure the handlebar covers
(3+4) with screws (11) at handlebar support (9) [Drawing 3].
Summary of Contents for 1501
Page 4: ...4 ...
Page 54: ...54 7 1 2 6 10 1 10 11 9 ...
