18
Step 5:
Attach the computer (50) at main frame (1).
1. Take the computer (50) that has been supplied out of the packaging and
insert the batteries (Type “AA”-1.5 V pencells) by watching for the right
polarity on the back of the computer (50).
(Batteries for the computer are not included in this item. Please buy them
at your located market.) Push the computer (50) onto appropriate holder
of main frame (1) and connect the sensor cable (26).
Function principle of resistance regulation:
By turning the resistance knob in „+“ or „-“ direction, the brake belt (35) will
get more or less tension over the flywheel so that the exercise resistance
decreases or increases. If the brake belt (35) is loosely or be slipped off from
the flywheel, so you first have to turn the resistance knob (36) towards „-“.
Then put the brake belt (35) in the track on the flywheel (9) and attach the
end of the brake belt (35) at base frame by means of a belt loop as shown. (A)
Clamp the brake band (35) only slightly by hand and check by turning towards
„+“ of resistance regulation (36) whether the desired level of resistance can
be adjusted.
Step 6:
Checks
1. Check the correct installation and function of all screwed and plug
connections. Installation is thereby complete.
2. When everything is in order, familiarise yourself with the machine at a
low resistance setting and make your individual adjustments.
Note: Please keep the tool set and the instructions in a safe place as these
may be required for repairs or spare parts orders becoming necessary later.
Summary of Contents for 1320
Page 3: ...3 ...
