1
CONTENTS
Section
Description
Page No
1
Introduction
1
2
Safety Information
1-2
3
Kit Components / Kit Options
3
4
Technical Data
3
5
How the Tool Works
4
6
Installation and Operation
4-6
6.1 Standard Installation and Operation
4-5
6.2 Using the Stepped Block Accessory
6
7
Examination, Maintenance and Storage
7
8
Parts Lists
8-9
9
Weights and Dimensions
10
10
Troubleshooting
11
--
E.C. Declaration of Conformity
12
1 – INTRODUCTION
The Christie WCLW18TE Hydraulic Vertical Lifting Wedge is an aid for assisting with the lifting
and installation of plant and heavy equipment.
Access gap required:
9.5 mm (0.37”)
Lifting force:
10,000 psi (700 bar) = 18 T (180 kN)
2 – SAFETY INFORMATION
The operator MUST read this manual prior to using the tools.
Failure to comply with the following cautions and warnings could cause equipment damage and
personal injury; read the manual fully!
Read all the following instructions, warnings and cautions carefully. Follow all safety precautions to
avoid personal injury or property damage during system operation.
W. Christie (Industrial) Limited cannot be responsible for damage or injury resulting from unsafe product
use, lack of maintenance or incorrect product and/or system operation. Contact W. Christie (Industrial)
Limited when in doubt as to the safety precautions and applications. To protect your warranty, use only
good quality hydraulic oil of the grade 32cSt.
Only people competent in the use of hydraulic equipment should use these tools.
In all installations the site safety requirements must be adhered to. ALSO the safety of the operator, and
when present, any assisting personnel, is of paramount importance along with the safety of others
including, when present, the general public.
These instructions are only to cover the safe operation of THE CHRISTIE WCLW18TE HYDRAULIC
VERTICAL LIFTING WEDGE during normal maintenance/installation operations. All other safety
aspects must be controlled by the operation supervisor.
