Instruction Manual
Vivid LX20 Mount
1
IMPORTANT WARNINGS AND CAUTIONS!
WARNING:
A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions.
CAUTION:
A
CAUTION
alerts you to the possibility of damage or destruction of equipment if you do not follow the cor-
responding instructions.
•
WARNING: Improper installation can result in serious personal injury! Make sure that the ceiling structural mem-
bers can support a redundant weight factor
five times
the total weight of the equipment. If the ceiling can not support
this weight, reinforce the ceiling before installing the mount.
•
WARNING: Be aware also of the potential for personal injury or damage to the unit if it is not adequately mounted.
•
WARNING: The installer is responsible for verifying that the ceiling to which the mount is anchored will safely sup-
port the combined load of all attached components or other equipment.
•
WARNING: The weight of the projector must not exceed 40 lbs (18 kg), the maximum load capacity of the mount.
•
CAUTION:
To avoid personal injury or damage to the mount, be sure that it is installed square and parallel in all dimensions.
•
CAUTION:
Check the unit for shipping damage before you begin the installation.
CONTENTS
TOOLS REQUIRED FOR INSTALLATION .... 1
PROJECTOR INSTALLATION
PROCEDURES ................................................... 2
RPA INSTALLATION PROCEDURES.............. 2
ADJUST YAW, PITCH AND ROLL .................. 4
PARTS ................................................................. 5
DEALER INFORMATION ................................. 6
DIMENSIONAL DRAWING ............................. 7
TOOLS REQUIRED FOR INSTALLATION
• Phillips screwdrivers, No. 1 and No. 2 TIP
NOTE:
Other tools may be required depending on the
method of installation.
