Installation
Complete the following procedures to install the speaker.
All images shown in the installation instructions reference the LS1S speaker; however, these instructions
are applicable to the entire LS surround speaker line.
Mounting the speaker to the wall
Using the BKTW-LSXS tilt bracket, attach the speaker to the wall.
Laser alignment is required when installing this speaker.
For detailed laser alignment instructions, refer to Vive Audio Line Array and Line Source Laser
Alignment Procedures (020-101406-XX) (https://www.christiedigital.com).
The tilt bracket is not included with the speaker box. It is supplied as a separate part (P/N: 145-178107-
XX).
1. Remove both pins from the bracket.
2. Separate the bracket halves.
Christie Vive Audio LS1S/LS2S/LS4S/LS5S Line Source Surround Speakers User Manual
8
020-102172-01 Rev. 1 (06-2016)
Copyright
©
2016 Christie Digital Systems USA Inc. All rights reserved.
