7. Attach the wall mounting half of the bracket to the wall using appropriately sized lag bolts
(not included in the box) according to laws and regulations applicable to the venue.
8. Place the speaker mounting half of the bracket against the wall mount so the bottom prongs
of the wall mount are resting directly underneath the bottom pin.
9. Using a laser alignment tool, adjust the tilt of the speaker.
10. Insert a pin removed in step 1 into the top hole marked with the required angle of tilt.
To ensure the bracket pin is not visible, insert it with the ring pointing towards the projection
screen.
Installation
Christie Vive Audio LS1S/LS2S/LS4S/LS5S Line Source Surround Speakers User Manual
11
020-102172-01 Rev. 1 (06-2016)
Copyright
©
2016 Christie Digital Systems USA Inc. All rights reserved.
