Christie Vive Audio CDA5, User Manual

Page: 18 / 27

10 Christie Vive Audio CDA5/CDA7.5 Amplifiers User Manual
020-101354-01 Rev. 1 (03-2014)
Operation
This section provides operating procedures.
Turn the Power On
•
Use only the AC power cord that is provided. DO NOT attempt operation if
the AC supply is not within the specified voltage and power range. Failure
to comply could result in death or serious injury.
•
As a safety feature, the amplifier is equipped with a three-wire plug with a
third (grounding) pin. If you are unable to insert the plug into the outlet,
contact an electrician to have the outlet replaced. DO NOT defeat the
safety purpose of the grounding-type plug. Failure to comply could result
in death or serious injury.
• DO NOT attempt operation if the AC supply is not within the rated voltage
range as specified on the license label. For power requirements, see Power
on page 19. Failure to comply could result in death or serious injury.
•
Disconnect amplifier from AC before opening any enclosure. Failure to
comply could result in death or serious injury.
• Only qualified service technicians are permitted to open enclosures and
only if the amplifier is disconnected from AC power. Failure to comply
could result in death or serious injury.
•
DO NOT allow anything to rest on the power cord. Locate the amplifier
where the cord cannot be damaged by persons walking on it or objects
rolling over it. Never operate the amplifier if the power cable appears
damaged in any way. Failure to comply could result in minor or moderate
injury.
• DO NOT overload power outlets and extension cords as this can result in
fire or shock hazards. Failure to comply could result in minor or moderate
injury.
1. Verify that the power cord is connected and that the amplifier settings are as required.
2. Move the AC power switch to the on position.
Turn the Power Off
Move the AC power switch to the off position.