Christie Vive Audio CDA5, User Manual

Page: 15 / 27

Christie Vive Audio CDA5/CDA7.5 Amplifiers User Manual 7
020-101354-01 Rev. 1 (03-2014)
Installation
This section provides information and procedures for installing and connecting the Christie Vive Audio
CDA5/CDA7.5 Professional Power Amplifiers.
Install the CDA5 or CDA7.5
An incorrect power setup creates a fire and shock hazard. Do not attempt operation
unless the power cord, power socket, and power plug meet the appropriate local
rating standards. Have a certified electrician install a permanent single-phase
connection from the amplifier to the AC supply for correct installation. Failure to
comply could result in death or serious injury.
Always provide proper ventilation to the Christie Vive Audio CDA5/CDA7.5
Professional Power Amplifiers. Allow 31 cm (12 in.) clearance at the front and the
back of the amplifier. Make sure that vents are not blocked and that air can flow
freely through the unit. Do not use doors or covers on the front of the rack. If a
back cover is used, provide at least one standard rack-space opening for every 4
amplifiers. Failure to comply may result in equipment or property damage.
1. Slide the CDA5 or CDA7.5 amplifier into your rack.
2. Secure the amplifier in position using 4 screws through the rack mounting ears.
3. Connect one end of the power cord to the AC power inlet and the other end to the power outlet.
4. Connect the output and input connectors.
See Connections on pages 12-13.
5. Turn the power on.
See Turn the Power On on page 14.
Connections
Always turn off and disconnect the Christie Vive Audio CDA5/CDA7.5 Professional Power
Amplifiers from power before making audio connections. Failure to comply may result in
equipment or property damage.
This section describes the input connections of the Christie Vive Audio CDA5/CDA7.5 Professional Power
Amplifiers.