Christie Spyder Stereoscopic Option 2, User Manual

Page: 19 / 20

Creating and Editing Spyder Stereoscopic Configurations
Spyder Stereoscopic Option 2 (SSO2) User Manual 19
020-000869-01 Rev. 1 (04-2016)
Figure 8: Standard Output Properties
Standard Output Property Panel Options
1. Output Sync Type

The ‘Stereo’ option is avai lable in this
dropdown, which allows a standard output
to provide an active stereo signal from the
V-Sync channel of the analog output
connector. When in this mode the output
will still output video with a composite sync.

The ‘StereoInverted’ option works the same
as the ‘Stereo’ option mentioned above,
however the sync pulse is inverted, to swap
the left and right eye on the display device.
2. Mode

When running in SSO2 / MirageHD mode,
the output should be set to Normal mode.