Christie Spyder Stereoscopic Option 2, User Manual

Page: 18 / 20

Creating and Editing Spyder Stereoscopic Configurations
Spyder Stereoscopic Option 2 (SSO2) User Manual 18
020-000869-01 Rev. 1 (04-2016)
Stereoscopic specific options for input modules
Input Configuration Layer Properties
Stereo Mode

Defines the stereo mode for the selected
input. Interleaved or Off are the only two
valid modes when using SSO Mode 2
Clone Offset

This option is not supported in SSO Mode
2.
Input Configuration Advanced
Properties
StereoInvertEyes

This option, available only in the advanced
section of the layer properties panel,
causes the system to invert the left and
right eye signals on the Spyder input.
Editing output configurations
Stereo properties of output configurations can be edited in the same manner as the normal output properties
after the initial system configuration is performed. To access output properties, click the desired output in the
‘System Patch’ tab of the Vista Advanced or Vista Basic user interface.
The tables below show the available options for manipulating stereoscopic outputs using the output property
panels.