3.3 Basic Operation
Operation
Adjusting the Tilt Feet
1. Lift the front edge of the projector.
2. Press the adjustment levers on the front of the projector and hold the levers.
3. Lower the front of the projector to desired height and release the lever to
lock the tilt feet.
4. Fine-adjust the height, use the height adjusters on the front of the projector.
4
2
2
3
1
1. Open the battery compartment cover on
the back of the remote control unit in the
direction shown.
2. Insert two size AAA batteries, ensure that
the positive and negative terminals are
aligned correctly.
3. Close the battery cover in the direction
shown.
Loading the Batteries (2 size AAA betteries)
Batteries Note:
!
!
!
!
Replace the battery as soon as they run out.
Remove the batteries if the remote control unit is not used for a long period
of time.
Dispose the used batteries in accordance with local recycling and waste
disposal ordinances.
When changing the batteries, use two new batteries of the same type.
16
Summary of Contents for Projector
Page 1: ...USER MANUAL ...
