Christie Projector, User Manual

Page: 17 / 38

Before turning on the projector, make sure the video source is turned on and
the lens cap is removed. Connect the power cord to the projector.
1. Turn on the main power switch on the side of the projector, the projector
will go into its standby mode and the power indicator will glow orange.
2. Press the Power button on the projector control keypad or on the remote
control, the power and lamp indicator will glow green and the projector
will be ready to use.
1. Press the Power button on the projector control keypad or on the remote
control, the message as below will show on screen. Press the Left button
to move the cursor to "Power Off" and press Menu button to turn off the
projector, and the power indicator will glow orange. After the projector is
turned off, the cooling fan will continue to run for 120 seconds and then
stop.
2. Switch off the main power switch on the side of the projector and unplug
the power cord. The power indicator will go out.
Turning On the Projector:
Turning Off the Projector:
NOTE:
NOTE:
Do not disconnect the power cord or switch off the main power
switch when the cooling fan is still running.
If mis-press the Power button, move the cursor to "Cancel" by
pressing the Right button and press Menu button to resume. The
message will disappear after 10 seconds if there is no response.
3.2 Turning On &
Turning Off The
Projector
Condition Power Indicator Lamp Indicator Description
Main power switch on Orange -
(side)
Power On
Green Green
Power Standby Orange -
Cooling down Flashing green - Flashing for 120 seconds
Lamp life (1500 hrs) Green Flashing Green
Temperature error Orange Flashing Red Projector in power standby mode
(2 sec interval) and cannot be turned on
Lamp error Orange Flashing Red Projector in power standby mode
(4 secs interval) and cannot be turned on
Fan error Orange Flashing Red Projector in power standby mode
(8 secs interval) and cannot be turned on
Power and Lamp Status Indicators Messages Chart:
Operation
LAMP
SOURCE
MENU
PO
ER W
MENU
POWER
LASER
DATA
KEYSTONE ZOOM
AUTO
VIDEO FREEZE
LM
RM
LEFT RIGHT
VOL- DOWN
UP VOL+
Lamp timer, message of
appears
on screen when the lamp reaches
1400 hours usage ; "Lamp Expired"
When lamp reaches 1500 hours
usage.
"The lamp is
reaching its limit. Please replace the
lamp as soon as possible."
POWER BUTTON WAS PUSHED!
Move the cursor to "Power Off"
and press MENU button
to turn projector off.
Power Off Cancel
System error Orange Flashing Red Projector in power standby mode
(1 sec interval) and cannot be turned on
15