background image

LX900 Lamp/Filter Replacement Instruction Sheet

5 of 6

020-000029-01 Rev. 1 (01/08)

1. Turn off the projector, and unplug the AC Line Cord 

from the AC outlet. 

2. First, clean up any dust on the projector and around the 

air vents.

3. Slide and open the filter cover (see Figure 4).
4. Pull out the filter cartridge by holding the finger grip.
5. Insert a new Filter and close the filter cover. Make sure 

that the filter cartridge is properly and fully inserted.

6. Connect the AC Line Cord to the projector and turn 

ON the projector.

7. Reset the Filter counter and the Scroll Counter .

 

RESETTING THE FILTER COUNTER

Be sure to reset the Filter counter replacing the filter.
1. Press the MENU button to display the On-Screen 

Menu. Use the 

 buttons to move the red frame 

pointer to the Setting Menu icon.

2. Use the 

 buttons to move the red frame pointer 

to Filter counter and then press the SELECT 
button. A dialog box appears showing the Used 
Time option you can scroll to view the remaining 
Time options. Use the 

 buttons to select Used 

time.

3. Used time shows the total accumulated time of the 

filter use, a timer setting option, and the Reset 
option. Select Reset and the “Filter counter 
Reset?” appears. Select [Yes] to continue.

4. Another confirmation dialog box appears, select 

[Yes] to reset the Filter counter.

 NOTICES

1) The projector will not turn ON if the filter cartridge is not 
fully and properly inserted into the projector. 

2) Do not put anything into the air intake vents. Doing so may 
result in a malfunction of the projector.

Filter Cover

Filter Cartridge

Figure 4 Replace Filter

Select “Used time” 

to display the

following dialogue box.

Select [Reset] to display the

“Filter counter Reset?” 
dialogue box.

Select [Yes] to display the 

final confirmation box.

Select [Yes] to reset 

the Filter counter.

Figure 5 Reset Filter Counter

Summary of Contents for LX900







Reviews: