Christie LX1750, Network Manual

Page: 33 / 362

LX1750 Network User Manual
020-000639-01 Rev.1 (11-2013)
32
Chapter 4 Controlling the Projector
Power control and status check
Click
Power & Status
on the main menu. The control page will be dis-
played.
By clicking
ON or Standby on the page, the power of the projector can be
controlled.
Item Description
PJ status
Power ......................... Displays the status of the lamp. (ON, OFF, On starting up, On cooling down,
Service in need)
Status .......................... Displays the status of the projector's power. (Refer to next page.)
Power control ........ Controls the projector power by clicking "ON" or "Standby".
PJ temp.
External temp. A .. Displays the surrounding temperature of the intake vent.
Inside temp. A ...... Displays the temperature inside of the projector.
* The warning icon will appear if the temperature exceeds a specified value. Check if there is no
object to obstruct the airflow around the intake or exhaust vent. It might be airfilter clogged.
Replace the airfilter with new one.
* The temperature unit can be set either Centigrade or Fahrenheit in the item "Initial Setting".
(
+
p.22)
Popup confirmation window
Confirmation window
as shown in the below
appears when
Standby
is pressed.
✐
The projector cannot be turned on while the projector is on cooling down.
✐
The web browser checks and updates the projector's condition every 30 seconds automatically.
Warning temperature icon