Christie LX1750, Network Manual

Page: 30 / 362

LX1750 Network User Manual
020-000639-01 Rev.1 (11-2013)
29
ENGLISH
SNMP setting
This projector provides a SNMP (Simple Network Management Protocol)
agent function. The SNMP consists of a manager and agents. The group
which communicates information each other with SNMP is called
"Community". There are two access modes in a community, Refer (read only) and Set (read-
write). This projector allows Refer (read only) only. The SNMP message informs the projector
status called "Trap" to an administrator. Click
SNMP Setting
on the main menu and set up
each item.
Item Description
Contact
............................................... Enter user name of the projector etc. (optional).
Place
.....................................................Enter place of the projector (optional).
Community name(refer)
....... Enter community name (read only). Default name is "public".
PJ information
SNMP setting
Item Description
Community name
...................... Enter community name to send "Trap". Default name is "public".
Trap address
................................... Enter IP address of the SNMP manager computer to receive "Trap".
Trap