Installation
FHQ841-T LCD Panels User Manual
23
020-000735-01 Rev. 1 (06-2014)
RGBHV (VGA) Source Connection
Connect a personal computer or other RGB source to the VGA input as shown below. For a list of
compatible input signals see
Supported Timings
on page 44.
Turning on the Power
1. Turn on your source components.
2. Plug the female end of the supplied power cord into the AC receptacle on the side of the display
(AC 100V ~ 240V).
3. Connect the other end to your AC power source.
4. Turn on the main power switch at the side of the display.
The power indicator light indicates that the display is in “standby” mode.
5. Press the power button on the remote control to turn on the display (or press the power button
on the keypad). After a brief warm-up period, the display will display an image.
Avoiding Image Retention
Follow the recommendations below to prolong the life of the display.
• Operate the Display Within Its Rated Ambient Environment
• Operating temperature: 5°C to 35°C (41°F to 95°F)
• Relative humidity: 85%, maximum.
Do not display static (non-moving) content on the display for long periods of time. This may
cause image “burn-in” or image retention, which is not covered under warranty.
