manualshive.com logo in svg

Christie FHD553-XU, User Manual

Share
Download
Christie FHD553-XU User Manual Download Page 5

Updating the clock (VGA sources). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Adjusting the phase (VGA sources). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Changing VGA ADC settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Enabling IRFM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Setting the baud rate. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Choosing a Wake Up From Sleep mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Configuring Ethernet settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Updating Multi-Display Control settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Obtaining the temperature and fan status. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Enabling DisplayPort Multi-Stream Transport (MST). . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Disabling the OPS Always Powered setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Performing a factory reset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Reading the system status. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Recommended low-light image settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

The display does not turn on. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
No picture appears on the display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
The remote control does not work. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
The image geometry is incorrect. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
The content is jittery or unstable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
The image is too bright or lacks definition. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
The image appears washed out. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
The image is too dark. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Images from the HDMI source do not display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Computer images do not display correctly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Physical specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Power requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Environmental specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Supported timings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Overall dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Regulatory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Electro-magnetic compatibility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Environmental. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Content

FHD553-XU User Guide

5

020-001248-02 Rev. 1 (04-2018)

Copyright 

©

 2018 Christie Digital Systems USA, Inc. All rights reserved.

Summary of Contents for FHD553-XU




















































Reviews:

No comments

Brands by name

Popular brands

Load more brands