manualshive.com logo in svg

Christie FHD553-XU, User Manual

Share
Download
Christie FHD553-XU User Manual Download Page 38

Enabling DisplayPort Multi-Stream Transport (MST)

When you enable DisplayPort MST, display panels in a video wall that are connected using DisplayPort

1.2 are recognized by the control computer as independent display panels instead of a single display.
Before enabling DisplayPort MST, consider the following.

•

The Video Wall setting in the Multi-Display Control menu should be set to Off.

•

The graphics adapter and operating system on the control computer must support MST.

•

MST mode requires high-quality cables that are DisplayPort certified.

•

Depending on the graphics adapter, up to 4 display panels can be daisy-chained in MST mode.

•

In MST mode, the recommended resolution setting for each display panel is 1920x1080. The
maximum resolution of a 2x2 video wall is 3840x2160 at 60 Hz.

1. Press MENU on the remote control or keypad.
2. Select Advanced Settings > DisplayPort MST.
3. Use the arrows to enable DisplayPort MST.

Disabling the OPS Always Powered setting

Learn how to turn off the OPS Always Powered setting.

1. Press MENU on the remote control or keypad.
2. Select Advanced Settings > OPS Always Powered > No.

Performing a factory reset

Learn how to restore all display settings, including image settings, to their factory defaults.
This action is not reversible.

1. Press MENU on the remote control or keypad.
2. Select Advanced Settings > Factory Reset.
3. Use the arrow keys to select Yes.

Reading the system status

You can find the system status on the main menu of the display panel.
The System Status menu is read-only and provides the following information about the display panel.

•

The resolution and refresh rate of both main and picture-in-picture sources.

•

The number of hours the display has been in operation.

•

The current firmware version.

Updating display settings

FHD553-XU User Guide

38

020-001248-02 Rev. 1 (04-2018)

Copyright 

©

 2018 Christie Digital Systems USA, Inc. All rights reserved.

Summary of Contents for FHD553-XU




















































Reviews:

No comments

Brands by name

Popular brands

Load more brands