3. Remove the four Phillips screws from the fan board.
4. Replace the fan board.
5. To re-install, follow these steps in reverse order.
Replacing the LVDS to FFC board
The LVDS to FFC board is located in the upper-middle rear of the display panel.
1. Remove the rear cover.
2. Remove the two screws securing the fan bracket to the display panel.
3. Remove all cables connected to the board.
4. Remove the two Phillips screws from the LVDS to FFC board.
5. Remove the ribbon cable.
6. Replace the LVDS to FFC board.
7. To re-install, follow these steps in reverse order.
Replacement procedures
FHD553-X Service Guide
16
020-001658-01 Rev. 1 (01-2019)
Copyright
©
2019 Christie Digital Systems USA, Inc. All rights reserved.
Summary of Contents for FHD553-X
Page 1: ...Service Guide 020 001658 01 FHD553 X ...
Page 24: ......
