Introduction
DWU6322-GS/DWU7062-GS User Manual
18
020-001792-01 Rev. 1 (04-2020)
Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.
LED status indicators
LEDs are defined below.
Light LED
Identify the laser diode state colors and meaning.
Status LED
Identify the LED state colors and meaning.
Picture Mute LED
Identify the picture mute LED state colors and meaning.
LED status
Projector state
Red (flashing)
Projector has lost over 60% initial luminance.
Orange (solid)
Laser diode time has expired.
Green (solid)
Laser diode is on and operating correctly.
Off
Laser diode is off.
LED status
Projector state
Off
AC power is off (without AC plugged in).
Off, but keypad LED is on
AC has been applied, projector is in standby mode.
NOTE: Status LED cannot be flashing red, as this is reserved for an error condition.
Status LED is off but keypad LED will indicate Standby Mode.
Green (solid)
Projector is powered up and operating normally.
Green (flashing)
Projector communications.
Orange (flashing)
Projector is in cool down mode or startup mode.
Green (flashing) / Orange
(solid)
Projector is in flash update state.
Red (solid)
Over-temperature.
Red (flashing)
Fan failure.
LED status
Projector state
Green (solid)
Light is on and an image is displayed.
Orange (solid)
Light is on and the image is blank.
