Installation and setup
Learn how to install, connect, and optimize the projector.
This section provides detailed information on projector setup.
Site requirements
To safely install and operate the CP2415-Xe projectors, the installation location must meet these
minimum requirements.
Physical operating environment
•
Ambient temperature (operating) 10 to 35°C (50 to 95°F)
•
Humidity (non-condensing) 10% to 80%
•
Operating altitude 0 to 3000 meters (0 to 9843 feet) at 10 to 25°C (50 to 77°F)
External exhaust ducting
The installation site must provide sufficient external exhaust airflow to make sure adequate cooling of
the Xenon arc lamp.
•
At 25°C (77°F) ambient or less and below 915 meters (3,000 feet), a minimum of 450 CFM is
required.
•
Above 25°C (77°F) or above 915 meters (3,000 feet), a minimum of 600 CFM is required.
Power specifications
Learn the power requirements for the projector.
Main input
Item
Description
Voltage range
200-240 VAC
Maximum current
16 A
Line frequency
50/60 Hz
UPS input
Item
Description
Voltage range
100-240 VAC
Maximum current
4 A
CP2415-Xe Installation and Setup Guide
16
020-103584-02 Rev. 1 (09-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Summary of Contents for CP2415-Xe
Page 1: ...Installation and Setup Guide 020 103584 02 CP2415 Xe...
Page 48: ......
