![background image](http://html1.mh-extra.com/html/christie/cp2309-rgb/cp2309-rgb_installation-and-setup-manual_2603745037.webp)
•
The two Rotate set screws on the integrator.
•
The Focus slider lock screw on the integrator.
•
The V FOLD and H FOLD screws on the fold mirror.
15. Reinstall the top lid of the projector.
Adjusting vertical boresight
Perform a top and bottom boresight adjustment to fix image focus issues that cannot be corrected by
aligning the projector to the screen and focusing the lens.
Caution! If not avoided, the following could result in minor or moderate injury.
•
This procedure must be performed by Christie qualified technicians.
Ensure that the projector is perpendicular to the screen before adjusting boresight.
Christie recommends that you complete a top and bottom boresight adjustment before adjusting the
horizontal boresight.
A boresight adjustment should only be made when the image cannot be focused uniformly on the
screen by aligning the projector to the screen and focusing the lens. When adjusting boresight, you
must maintain the boresight distance from the lens to the prism plane set by Christie. For example,
when you move the top screw outward, turn the bottom two boresight screws to maintain the overall
distance.
Ensure that the boresight lockdown screws are adequately tightened. Inadequately tightening the
boresight screws can result in excessive onscreen image vibration. After adjusting boresight, evaluate
the onscreen image vibration and re-adjust if needed.
1. Remove the lens surround.
2. Display the DC2K Boresight test pattern.
3. Loosen the set screw (B).
4. Turn the vertical cap screw (A) 1/8 of a turn counter-clockwise.
Only adjust vertical boresight 1/8 of a turn or less at one time to maintain optimal lens
performance (factory setup of absolute lens distance to the prism). It is critical that you count
each turn of the cap screws to ensure accurate adjustment.
Adjusting the image
CP2309-RGB Installation and Setup Guide
37
020-103078-01 Rev. 1 (06-2019)
Copyright
©
2019 Christie Digital Systems USA, Inc. All rights reserved.
Summary of Contents for CP2309-RGB
Page 1: ...Installation and Setup Guide 020 103078 01 CP2309 RGB...
Page 44: ......