Christie CP2230, Service Manual

Page: 90 / 150

5-30 CP2230 Service Manual
020-100562-06 Rev. 1 (05-2016)
Section 5: Parts and Module Replacement
9. Loosen the single thumbscrew securing the light dump
and remove.
10. Using the hex tool provided, loosen the three captive
screws securing the light engine in place.
11. Using the built-in light engine handle, carefully lift the
light engine assembly out of the projector. ( Figure 5-43 )
12. When installing, repeat above instructions in reverse.
Reshoot MCGD files, align the aperture and adjust
convergence. For details, refer to
Section 3 Service
Setups .
Figure 5-43 Top View of Light Engine