Christie CineLife+ 4 Series, Technical Reference

Page: 15 / 32

Command Description Values
ILS+ENAB? Indicates if the ILS is enabled (1) or disabled (0). (Read-only) —
ILS+INST? Indicates if the ILS is installed (1) or not (0). (Read-only) —
ILS+RSET 1 Performs a reset on the lens motor. 1
ILS+RSTS? Returns the status of the motor reset. (Read-only)
0 = Complete
1 = In progress —
Examples
Perform a full calibration of all axes of the lens system:
(ILS+CALB 1)
Perform a reset of all axes of the lens:
(ILS+RSET 1)
Return the status of the calibration:
(ILS+CSTS?)
Result:
(ILS+CSTS! 0)
Return the status of the motor reset:
(ILS+RSTS?)
Result:
(ILS+RSTS! 1)
Return the status of the ILS installed:
(ILS+INST?)
Return the status of the ILS enabled:
(ILS+ENAB?)
INR–Interrogator
Initiates an interrogator.
Parameters
• Access level: Operator
• Power level (minimum): Power Up
Commands
Command Description Values
INR 1 Initiates an interrogator. 1
C
™
serial commands
C Technical Reference–Serial Commands 15
020-103075-05 Rev. 1 (09-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.